Tamworth Door Canopy

The Tamworth door canopy

This a mono pitched, tile effect top canopy.. The price includes GRP resin brackets. All prices include VAT, delivery to mainland UK and fixtures and fittings. Other mono pitch canopies are available, such as the Berkley canopy in the Senator range.

The following options, or optional extras are available with the Tamworth door canopy.

Roof Tile Colour

• Grey
• Terracotta

Base Colour

• White
• Brown
• Oak
• Rosewood

Decorative Legs / Brackets

• Brackets included

Overall Roof Size

• 1250mm x 650mm
• 1410mm x 650mm
• 1800mm x 650mm
• 2300mm x 650mm
• 2800mm x 650mm
• 3300mm x 650mm
• 3800mm x 650mm

How To Fix The Tamworth Door Canopy

Brackets

1. Position brackets at each side of the door opening, ensuring that they are level and the correct distance apart.
2. Drill a hole at the bottom of the bracket, just under where the 2 parts meet.
3. Drill a second hole near the top of the bracket.
4. Position the brackets and mark the walls for drilling. Drill and plug holes in the wall.
5. Fasten the brackets to the wall using screws and cover caps provided.
6. Trim cross piece to length and fit to brackets by drilling and screwing.

Top Section

1. On the simulated lead flashing upstand, mark holes at 400mm centres, starting 50mm from each end. Drill through upstand.
2. Slide the top section onto the brackets and mark holes on the wall. Lift down top section.
3. Drill and plug holes in the wall. Fit the top section and fasten with screws and caps.
4. Run a bead of clear silicone along the top of the lead effect flashing to prevent water ingress.
5. Wash down your Tamworth canopy with warm, soapy water.

The Tamworth door canopy is maintenance free and will only require an occasional wash with warm, soapy water to maintain its appearance. Do not use abrasives or solvent cleaners.

Delivery Time

• 10 to 15 days