Ripley Door Canopy

The Ripley door canopy

This a flat topped lead effect canopy with scalloped edge detail and a smooth fascia incorporating period detailing. This canopy comes complete with BRG08 GRP corbel brackets. All prices include VAT, delivery to mainland UK and fixtures and fittings. The following options, or optional extras are available with the Ripley door canopy.

Roof Colour

• White
• Brown
• Oak
• Rosewood

Decorative Legs / Brackets

• GRP corbels included

Overall Roof Sizes

• 1500mm x 610mm
• 1800mm x 610mm
• 2000mm x 610mm
• 2200mm x 610mm
• 2500mm x 610mm
• 2800mm x 610mm
• 3000mm x 610mm
• 3300mm x 610mm
• 3600mm x 610mm 

How To Fix The Ripley Door Canopy

1. Find the centre of the door opening and measure out the position for the support brackets. This can vary, but you must ensure the brackets will fit under the base ends.
2. Fix the brackets level onto the wall using the plugs, screws and cover caps provided.
3. Position the bottom tray onto the brackets and centralise with the door opening. Screw back against the wall and fix the end of each bracket to the tray.
4. Slide the top onto the bottom tray flange and fix back to the wall through the lead look upstand at approximately 300mm intervals.
5. Clean off any dust or dirt and seal using a suitable silicone sealant.
6. Clean with warm, soapy water. Your installation is now complete. 

The Ripley door canopy is maintenance free and will only require an occasional wash with warm, soapy water to maintain its appearance. Do not use abrasives or solvent cleaners.

Delivery Time

• 10 to 15 days